The
heat for the past couple of weeks has kept most people inside enjoying the air
conditioning. And the electric meters are spinning, using more electricity than
normal. This is the time of year when everyone wants to know how to cut their
energy consumption for lower electric bills.
The
trick to reducing your summer air conditioning costs is to reduce the amount of
time that your air conditioner runs. There are three basic ways to reduce
operating hours. The first is to make sure your system is running properly with
good maintenance and service. The second is to increase your thermostat setting
either manually or automatically. And the third is to employ low-cost cooling
methods.
Your
system’s filters and coils should be cleaned periodically. A dirty system
deteriorates air conditioning performance and increases operating time. Ask your
service technician how to change filters and how to clean your outdoor coil. The
filters should be changed every one to three months and the outdoor coil should
be cleaned every year.
If
your home is vacant for part of the day, use a programmable thermostat to turn
the temperature up before you leave and down before you return. You will need to
experiment with different time settings to test how long it takes the system to
recover from the higher temperature.
By
the way, closing registers in unused rooms doesn’t usually help to reduce
operating hours and may reduce your system’s efficiency.
For
low-cost cooling methods, try these effective improvements to reduce air
conditioning operating hours.
·
Set your thermostat up 4
degrees and run room fans to move the air and cool your family by the wind chill
effect. Fans can counteract the higher thermostat setting.
·
Install shades, blinds,
awnings, sun screens, or window films your sunny-side windows.
·
Insulate your attic to the
maximum practical depth of insulation.
·
Line-dry your clothes if
possible.
·
Don’t use your oven on
hot days.
·
Install compact
fluorescent lamps in the fixtures you use the most. Old-fashioned incandescent
lamps produce 10% light and 90% heat.